Canon G2010 Resetter Exclusive Site

The solution? A tool.

A: Typically 2–3 times before the physical pad must be replaced. After that, ink will leak. Final Verdict The Canon G2010 resetter is a lifesaver for getting your printer working again after a false “ink absorber full” error. Use it carefully, always scan the tool for viruses, and don’t ignore the physical maintenance.

After resetting, your printer will work normally, but you should eventually service the absorber. This is the trickiest part. Many resetter downloads online contain malware, viruses, or are simply fake. canon g2010 resetter

| If your printer... | Action | |-------------------|--------| | Is < 2 years old, light use | Reset only – pad is likely fine. | | Is > 2 years old, heavy use | Open printer and replace/clean absorber pads (or install an external waste ink tank). | | Leaks ink after reset | Immediately stop using, clean internal pads, or take to a repair shop. |

The error doesn’t always mean the pad is physically full. Canon sets a conservative counter. However, if you’ve printed thousands of pages, the pad may actually be saturated. ⚠️ Warning: Resetting the counter without cleaning or replacing the physical ink absorber can lead to ink leaking inside your printer, potentially damaging it permanently. What is a Canon G2010 Resetter? A resetter is a small software tool (usually for Windows) that resets the printer’s internal waste ink counter back to zero. It does not physically clean or replace the ink pads — it only tells the printer that the counter is empty again. The solution

If you own a Canon Pixma G2010 (part of the popular MegaTank series), you’ve probably encountered the dreaded “Ink Absorber Full” or “5B00” error message. This usually appears after years of heavy use, and it stops you from printing entirely.

A: Very difficult. Almost all reset tools are Windows-only. Some advanced users use virtual machines or Wine on Mac/Linux, but it’s not reliable. After that, ink will leak

In this complete post, I’ll explain what this error means, why you need a resetter, where to find a safe one, and how to use it step-by-step. Your Canon G2010 has an internal sponge (the waste ink absorber) that collects ink purged during print head cleaning. The printer tracks how much ink it has dumped. Once it reaches a preset limit, the printer locks itself down to prevent overflow.