Inside, the powder is fine, grey, and uniform – no lumps. The smell is typical of high-grade polymer-modified mortars (slightly chemical but not overpowering). Mixing ratio: Approx. 50–55ml water per 300g (about 6–7 parts powder to 1 part water). Working time: ~20–25 minutes (slightly longer than cheap adhesives). Pot life: ~2 hours in the bag if you seal it properly.
A Ferrari of small-format tile adhesives – expensive per gram, but a joy to use. Keep one in your workshop for emergencies. butagoma 300g
Repair kits, sample testing, or high-flexibility small jobs. I don’t recommend it for: Whole walls, floors, or budget-conscious projects. Inside, the powder is fine, grey, and uniform – no lumps
I tested it on a 30x30cm ceramic tile repair. The mix was creamy but held a notch well – a 4mm notched trowel left perfect ridges that didn’t collapse. Compared to standard bulk adhesive (like Mapei or Bostik), Butagoma felt slightly smoother and more “buttery,” which made back-buttering small tiles easy. 50–55ml water per 300g (about 6–7 parts powder
Inside, the powder is fine, grey, and uniform – no lumps. The smell is typical of high-grade polymer-modified mortars (slightly chemical but not overpowering). Mixing ratio: Approx. 50–55ml water per 300g (about 6–7 parts powder to 1 part water). Working time: ~20–25 minutes (slightly longer than cheap adhesives). Pot life: ~2 hours in the bag if you seal it properly.
A Ferrari of small-format tile adhesives – expensive per gram, but a joy to use. Keep one in your workshop for emergencies.
Repair kits, sample testing, or high-flexibility small jobs. I don’t recommend it for: Whole walls, floors, or budget-conscious projects.
I tested it on a 30x30cm ceramic tile repair. The mix was creamy but held a notch well – a 4mm notched trowel left perfect ridges that didn’t collapse. Compared to standard bulk adhesive (like Mapei or Bostik), Butagoma felt slightly smoother and more “buttery,” which made back-buttering small tiles easy.